Simple modification on a cheap titanium spoon, now able to lift hot pots and lids. I used a hacksaw and a file.

Holding the spoon sideways makes it very study, it doesn't bend lifting heavy stuff.

YKK Vislon #10 zipper ended up with 2 broken teeth. An hour in cad, 13 min on the 3d printer and a half hour sewing and supergluing the thing on. The new teeth are made of TPU. It’s not perfect, but this bag is saved from the landfill.

Great bag but just too deep/awkward for my kiddos school books.

In the previous post, I discussed how my constraints and lifestyle made me design a bag around them. The bag I designed mostly addressed my needs, with the caveat that it could be mildly annoying to transition, esp during rush hours, due to the multiple steps required to achieve it. Additionally, the older version didn’t fit a laptop properly.

In the older version, it took 6 steps to go from a fully functional backpack to a sling bag. The new version only goes through 1 step.

I’ve shared a short clip of both bags side by side for comparison.

I would love to get your feedback and suggestions.

Hi all,

The teeth on my backpack zip have detached from the fabric, but also have warped slightly, so the zip gets stuck if it goes over this section.

If the teeth were ok, I would just stitch it back into the fabric of the bag, but I’m not sure if it would work properly even if I did. Is there anything I can do to fix it, or do I just need to replace the bag?

A local cobbler quoted me £28 to replace the zip, which is basically more than the bag.

Thanks in advance

Been a really great way for me to learn!

Hi all, I know a lot of us use the Singer HD for MYOG projects, so I wanted to share a couple of 3D printable upgrades I designed for the machine.

One is a handwheel grip (with m3 screw tightener), and the other is a beefed up reverse lever. I’ve found both really helpful, especially the handwheel when pushing through thicker fabrics.

If anyone wants to try them out, I’ve uploaded the (free) files to my MakerWorld account.

https://makerworld.com/en/@CamMakesGear/upload

Enjoy!

Bag in question is an Aer Travel Pack 3 Small (for about $9, if you're curious). The top part of the fabric of the right strap is totally cut across and on the right side, and there's also a hole where it's attached to the bottom part of the bag. The bag is in tip-top condition otherwise.

I'm planning on bringing it to my local bag repair shop tomorrow, but I'm also toying around with the idea of fixing it up myself. How doable is either option? For reference, I have basic hand sewing skills & equipment, and a couple of yards of Cordura 1680d on hand.

This Colombia bag that I bought last week feels nice but I wanted some internal organization for my flashlights mainly if I’m being honest.

I was going to just do the main compartment but my big complaint was the lack of organization in the front pocket so I took the divider panel completely off and made 2 copies from 210D venom Gridstop and then used some xpac scraps for the pockets themselves.

Quick a simple modification here, but hugely improves the use of my chest pack for bigger days flyfishing in the backcountry.

4 buckles and a few straps mean I don't need to wear both the back portion of my chest and my backpack. Now I can more comfortably carry enough gear in the backcountry not to die if anything happens.

I hated how the cuffs were always flopping around.

Small project but happy with the easy win!

I had a sailmaker add this zipper into my bag how did he do it? I want to do the same thing with this serving identical bag.

Is it possible to save it somehow? It's my most used backpack. Even if it's not waterproof anymore i don't care. Should just add some stitches as a stop and called it good enough? I figure this was my best subreddit for advice, thanks in advance!

just change regular fastecs for more convenient magnetic buckle

Hey everyone! On my last hike I got pretty burnt on my hands which led me to starting to use sun hoodies that have thumb holes, but they all obstruct the view to my watch which I use for navigation on the trail.

I decided to make a hole in my REI Sahara Sun Hoody and it came out great! I included some progress pics in case anyone wanted to do a similar modification to theirs.

I used this approach from a quilting video to make the the hole : https://youtu.be/dtYhL60TjJI?si=FEY7LQC7r11YQsP8

I cut an access spot in the opposite side of the sleeve to properly sew the perimeter of the hole. Since my shirt is pretty stretchy, I used some lite sew able heatnbond to keep the fabric in place

Photo captions: 1. Finished front view 2. Finished opposite view of patched access hole 3. Practice test piece to make sure I knew the process of making a watch sized hole 4. Access hole 5. Progress pic 6. Another progress pic, note I used a small perimeter of Lite Heatnbond to keep fabric in place before sewing the perimeter again for reinforcement

Hi everyone

Just wondering if anyone has any advice or experience with repairing this stitching problem.

The is the Velcro part of the sleeve.
The stitching is still intact just a bit loose on the end. In theory it won’t affect the function that much but I just wanna make it smooth.

I was thinking, stitching myself, but since this is a waterproof shell I’m afraid the water might sneak through the stitching into the inner layer.

Or any super strong fabric tape would work?

Thank you for the advises in advance!

I switched to a quilt last year and have been meaning to make a simple strap for my Nemo Filo pillow (great pillow if you like lower and wide) to keep it from sliding around.

This is simply some shock cord looped through the hang loop already sewn to the pillow case, and a cord lock sewn to the tag on the opposite side.

Not the most impressive MYOG but should work well!

I've seen many people like myself asking the question of "which straight stitch can I buy that does all fabric weights", but this video seems to suggest that the 8700H can be used as an 8700 with some adjustments.

https://www.youtube.com/watch?v=d5pNfcyW4so

I'm interested to know what people think about it. I'd like to sew denim and other heavy fabrics. People say the 8700 can do it but not to do it "too often" and to "be careful" with it, but what if I get to a stage where I'm making loads of heavy jackets? I still have a singer heavy duty domestic that I actually really like for lightweight fabrics so I'm thinking I can use that for that purpose and the industrial for heavier ones, but I'm keen to know the differences between these machines.

Beyond changing the feed dogs, foot and thoat plate (I think), is there any reason she shouldn't get the result she's expecting here? I get that machines have specific uses, but she seems confident that this is a solid workaround.

Thanks

I'm not sure if this is the right sub, but I have an old leather laptop bag and the (webbing) handle has ripped off. I plan to repair/replace it by bolting a length of webbing on top, as the layers of leather and fabric are too thick (~10mm) to sew. See attached diagram. The inner padding can be folded out of the way to work on this repair, and would hide the nut.

I'm open to any alternative suggestions for how to repair/replace this handle.

Thanks in advance!

Satisfy if an expensive running brand who sell T-shirts with holes called “mothtech” for ventilation.

I want to create this effect on some old T-shirts. Any recommendations on how I could achieve the effect? A rotary tool? Burning?

Any ideas or feedback welcome. Tysm