r/myog • • 3d ago

Help fixing peeling interior PU coating on Haglöfs Tight (Large) zipper flap?

0 Upvotes

7 comments sorted by

13

u/DrBullwinkleMoose 3d ago

I see bits of truth in three other responses here:
* Yes, the PU has gone bad and you can’t truly restore it to original. However, as long as the fabric is still strong enough to hold your stuff, then…
* Clean with a brush.
* Silicone diluted with mineral spirits (or Permatex Silicone Windshield Sealant) should help to waterproof it.
* I wonder if FlexSeal spray would work? They don’t say what it really is inside the can, so it’s a guess, but it sounds easy to apply. No clue how well it might work.

12

u/schinkenflip 3d ago

This is beyond repairability in my eyes.The coating is disintegrating, this can't be restored to previous condition.

7

u/Darkraisisi 3d ago

Clean all coating. Apply diluted silicone applied with a brush?

3

u/jwdjwdjwd 3d ago

It’s just the zipper flap. Brush off whatever is loose and let it be. It is not coming back to life. Maybe some seam tape or sew a light lining in there if you don’t like the look.

3

u/Hopeful-Lobster3018 3d ago

Imo the bag is totally fine and still usable, it’s just the PU coating is done. PU doesn’t last forever and can even break down after a short time. I wash/brush off the coating, which takes a bit of work, but I continue to use bags for years. I have arcteyx bags from ‘08 that are still going, i had to do this long ago but still use them a ton

1

u/godbog_ 19h ago

maybe it can be waxed?

1

u/uznme 3d ago

flexseal spray.