Getting rid of a few Knives that I have multiples of...

-Spyderco Endela , OD Green FRN, DLC Cruwear steel, MXG Clip

Edge Condition: factory edge

Ownership: Second

Centering/Lockup: great lock up clip side barely favor

Body Condition: Perfect no dings or scratches.

Box, papers, and accessories: Box

Modifications: MXG Clip

Disassembled: No

Carried or cut with: No Carry or cut

No original clip

US Only PayPal f/f 140$$

- Spyderco PM3, Barclay Black and Satin Hezron scales, S90v steel,mxg clip

Edge Condition: has not been sharpened light cut package opening/paper

Ownership: Second on the blade

Centering/Lockup: lock up great,centered.

Body Condition: Perfect no dings or scratches.

Box, papers, and accessories: Box from s90v lw

Modifications: Barclay single liner delete scales with mxg clip .

Disassembled: Yes

Carried or cut with: no carry light cut.

No original scales or clip or non lock side liner

US Only PayPal f/f 225$$ SOLD FOR 205$

-Spyderco PM3 LW, Barclay LW Dracos Armor scales, DLC M4 steel, lynch clip

Edge Condition: no sharpen light paper cut

Ownership: second on blade

Centering/Lockup: Centered good lock up

Body Condition: Perfect no dings or scratches.

Box, papers, and accessories: Box LW pm3 m4

Modifications: Barclay LW scales, lynch clip

Disassembled: Yes

Carried or cut with: light

No original scales or clip

US Only PayPal f/f 240$$ Sold $225

-Spyderco PM2 Barclay Lines of Hezron Fade ano Scales, Magnacut steel, lynch clip

Edge Condition: has not been sharpened light cut paper.

Ownership: First

Centering/Lockup: Good lockup and centered.

Body Condition: Perfect no dings or scratches.

Box, papers, and accessories: Box from pm2 salt

Modifications: Barclay Scales non lock liner delete,Lynch Clip

Disassembled: Yes

Carried or cut with: no carry,light cut paper.

No original scales or clip or liner.

US Only PayPal f/f 250$$ SOLD

Will ship quickly with tracking

Yolo in comments if you want it. Please comment chat on post before chatting. Will wait for you to chat and will only ask for PayPal friends and family payment.

US Only for shipping and no trades.

Got a new sharpener and don't need this one, just finding it a new home, need shelf space.

Probably used it about......5 times, like new I'd say, purchased new. Works great just wanted a stone system. If you have a 3d printer you can print a stabilizer for under the clamp, never got around to it.

Asking - $WHATEVER SHIPPING COSTS

If that's allowed?

Just got this knife direct from the dealer. It’s nice, but I just picked up a couple of other CRK that I like a little more. The knife has never been used or carried. This is the glass blasted version.

Name/Model: Large Inkosi Crosshatch with Insigno Blade GB

Price (SV): $625

Ownership: 1st

Centering/Lockup: Centered/ 40-50%

Body Condition: Perfect, no carry

Box and Papers: Includes all original packaging and COA

Disassembled: No, the knife has been flicked a handful of times, but other that it has been wrapped up and put back in the box. The knife is MINT

Blade Steel: MagnaCut

Handle Material: Titanium, glass blasted

Yolo is king, please send chat with any questions

Paypal FF or Zelle

Thank you

What's up Swap...

Continuing the collection adjustment with a few more pieces that deserve more pocket time than they're getting here. All of these are LNIB, unused, uncut, and uncarried unless otherwise noted. Original boxes, pouches, and accessories included.

No trades at this time.

Payment: PPF&F or Zelle

Shipping: CONUS included

YOLO > Chat

Asher Spiro Ti Liner Lock Wharncliffe - M390

SV: $120 SOLD

This very excellent knife features a milled titanium handles and Wharncliffe blade in M390. Excellent action, clean machining, and arguably one of the best values for a titanium EDC. LNIB condition. Unused, uncut, and never carried. Comes w/Civivi pouch.

Kunwu Padre "Reverse Tux" - DLC/Satin Vanax

SV: $210

Reverse Tux Padre with the gray titanium scales and DLC/satin blade treatment. If you've handled a Padre, you already know why these have such a following. Outstanding ergonomics, crazy smooth action, and that tank-like Kunwu build quality. LNIB condition. Unused, uncut but professionally sharpened. Includes all original Kunwu goodies.

WMK Exclusive Kizer Begleiter 2.9 - Textured Titanium / Elmax

SV: $110

White Mountain Knives exclusive Begleiter 2.9 featuring textured titanium scales, hollow-ground Elmax blade, and one of Kizer's best EDC platforms. Great size, slicey geometry, and a really premium feel for the money. #98/ BNIB condition. Catch n' Release. Comes with original box and accessories.

Olamic Wayfarer 247 Bowie #5 - Custom S90V / Crystallized Entropic Titanium

SV: $400 OBO

Another beauty that needs a new home.This is Wayfarer 247 Bowie #5, one of the early Bowie configurations produced when Olamic introduced the Bowie blade profile to the Wayfarer lineup. It features an S90V Bowie blade paired with absolutely gorgeous crystallized titanium scales finished with an entropic pattern by Eugene. The scales have incredible depth and color variation that shift in the light, making this one of those knives that's even more impressive in hand than in photos. A special piece for Olamic collectors or anyone looking for something a little different than the typical titanium frame lock. LNIB condition. Unused, uncut, and uncarried. Includes original Olamic case and COA.

Homer Zhu T-Rex #102/198 - Textured Titanium / Sculpted S35VN

SV: $300 SOLD

A very cool and increasingly hard-to-find build from Homer Zhu. This example is #102 of 198 and features textured titanium handles paired with the sculpted S35VN blade. Great attention to detail throughout and a design that stands out without being overdone. LNIB condition. Carried but remains uncut. Includes original packaging.

Thanks!

Hey yall. Really hate to do it as I had finally snagged my personal grail, figured it would be the forever knife, but fuck me if bills dont come knocking.

First up is a pristine PDW wave Umnumzaan. Got lucky the last drop, has been carried a few times, never cut. No marks, no blemishes, shes perfect. All I did was flick it open a bunch, show it off, and take the lanyard off.

Come with all goodies (slip, wrenches, etc.)

Due to hard to get-ness and need for funds, gonna keep this one up a bit high. Flame me if you must, try finding another one lol. Its brand new knife. Centering and lockup are phenomenal. Gonna be looking for $1100 for this one. zaan is sold.

Second up on the list is a pretty damn clean Neutron 2 in maganacut. Its a 2 dot example but fuck if I cant find out why. Shes clean, Sharp, and ready to carry. Centering is fine, lockup is great. Detent is great Neutron 2 priced at $160 trm is sold.

Not looking to entertain trades at the moment (although id love to lol)

Any purchases will be F&F.

Hey Swap! Got a fresh batch of spooky 3D-printed Magnafold Rosies just in time for Halloween! These make awesome desk toys, fidgets, or festive pocket pieces.

NOTE: These usually move fast! Please be ready to chat and pay promptly after calling a number/YOLO so everyone gets a fair shot at their choice.

Timestamp & Media Links

• Timestamp Photo: https://imgur.com/a/LtmklYD
• Action & Video Showcase:
  • Video Clip 1
  • Video Clip 2
  • Video Clip 3
  • Video Clip 4
  • Video Clip 5
  • Video Clip 6
  • Video Clip 7
  • Video Clip 8

Pricing

• SV: $25 for 1 | $45 for 2

Available Inventory (Claim by #)

(Numbered 1 to 16 from top to bottom as shown in the timestamp image)

How to Claim & Purchasing Rules

1. Comment below with the number(s) you want to claim (e.g., "YOLO #1 and #15").
2. Send a Chat or PM right away to lock in your purchase.
3. Prompt Payment: Please be ready to pay promptly upon chat. If I don't hear back or receive payment within 30 minutes, I will move on to the next buyer in line.

Payment & Shipping Terms

• Payment: PayPal Friends & Family (F&F) ONLY — No notes in PayPal please!
• Shipping: Ships CONUS via USPS Ground Advantage with tracking included.

Thanks for looking and happy Halloween!

Hello KS!

SOLD SOLD SOLD

YOLO > Chat.
PP FF No Notes.
No Trades. (Maybe a Hawk Talon)
Will ship USPS with Tracking.

Spyderco Chopped Manix 2 M4: $250 SOLD

Spyderco Manix 2 - Started out as a Blade HQ M4 G10 Exclusive Manix 2. Chopped by the infamous Twitchy Bladeworks (about the size of the Techno). Cut, Carried, Dyed G10 Scales, Sharpened M4 blade, multiple owners. Currently has all upgraded locking mechanism (Ti) and ceramic ball, fresh edge and blade & all hardware cerakoted by Shiny EDC in Green “Highland H-200” Cerakote. I love this build but have been hesitant to use it since the fresh cerakote job. Unused, centered and pristine since the mods.

BONUS ITEMS: Will come with some Spyderco catalogs, lots of knife related stickers, a Victorinox Recruit knife and shipped securely in a padded pouch.

SOLD Spyderco Lil Native CruWear Bundle: $149.99 SOLD S

SOLD Spyderco CruWear Lil Native: Original owner, light cut and carry. Currently has RGT Fluted Aluminum Robin’s Egg scales, RGT Black Ti screw set and LNW Black deep carry clip. Comes with box, docs, original Smooth G10 scales and original black hardware. SOLD

BONUS: Lots of knife related stickers and a Victorinox Classic knife in the box (LNIB)

Chat me if you have any questions or would like any additional pictures.

Hello [r/Knife_Swap](r/Knife_Swap)! Today I'm looking to do a bit of a purge in order to free up some cash... first kid on the way :) I put the highlight image of each item in the post slideshow, but each individual item will have it's own photo album linked in the description. Please don't hesitate to reach out with any questions!

1) EMP EDC Pulse R - SOLD SV $300 OBO SOLD
Honestly... I can't believe I'm letting this one go, but, I just can't justify hanging onto it at this time. This is the "Ridiculous" version of EMP EDC's Pulse OTF knife. Includes original pouch and signage. Never carried and never cut with. Lockup is solid, I've never had the action fail on me. Blade is Magnacut. Photos link.

2) EMP EDC Relative - SV $300 OBO
Knife-only, no original packaging. Carried twice, never cut with. Blade centering is perfect and lockup is super solid. Scales are black titanium and blade is Elmax. Photos link.

3) Kunwu & Metal Complex Excalibur - SOLD SV $250 OBO SOLD
This is the full-sized Excalibur. Includes all original packaging, pouch, etc. Carried two or three times, never cut with. Blade centering is perfect and lockup is super crisp and solid. This is the verta-lock version of the Excalibur with carbon fiber scales and Elmax blade. Photos link.

4) TuyaKnife Anzu - SV $150 OBO
Includes all original packing, pouch, etc. Never carried and never cut with. Blade centering is perfect and lockup is solid. Body is titanium and blade is M390. Photos link.

5) G-Shock 9400 Rangeman - SV $300 OBO
This is a modified Rangeman that in my opinion is the cleaneast configuration of the 9400 that you can get! At its heart, this is a GW-9400-1B that has had its negative module swapped out for a positive module. This is different than simply swapping the bezel and strap, because it retains the black features of the sub-dial and other features only found on the GW-9400-1B. Also included is an extra genuine Casio carbon fiber 9400 strap in mint condition. Photos link.

6) G-Shock GD-X6930E-9 - SV $275 OBO
This is a like new in box GD-X6930E-9 30th anniversary "Lightning Yellow". This watch includes original 30th anniversary packaging and tin, as well as sealed module manual. Photos link.

7) G-Shock GW-6900-1 - SV $75 OBO
This is the iconic "OG" 6900 featuring the EL backlight. Don't be spooked by the photo - she just needs a little sunlight and will boot right back up :) I misplaced the spring bars to toss the strap back on, but the strap is the original genuine Casio strap. Photos link.

8) G-Shock DW-6900US24-2 - SV $150 OBO
This is the "Three Eyed Monster"! Limited release, USA 6900 G-Shock. Includes all original USA "Firework" themed packaging and tin. Watch is in like new condition. Photos link.

Hello KS!

SOLD SOLD SOLD

PRICE DROP Now $222

YOLO > Chat.
PP FF No Notes.
No Trades.
Will ship USPS with Tracking.

SOLD Spyderco Chopped Manix 2 M4: $222 SOLD

Spyderco Manix 2 - Started out as a Blade HQ M4 G10 Exclusive Manix 2. Chopped by the infamous Twitchy Bladeworks (about the size of the Techno). Cut, Carried, Sharpened M4 blade, multiple owners. Currently has an upgraded locking mechanism (Ti) and ceramic ball. Blade has a fresh edge. Blade, clip & all hardware cerakoted by Shiny EDC in Green “Highland H-200” Cerakote. I love this build but have been hesitant to use it since the fresh cerakote job. Unused and pristine since the mods (minus some light fidgeting of course). SOLD

BONUS ITEMS: Will come with some Spyderco catalogs, lots of knife related stickers, a Victorinox Recruit knife and shipped securely in a padded pouch.

Payment: zelle or venmo

No trades

Price: SV $330

Light carried, has some fainted snail trails, cut some packages, sharpened once, solid lockup, centering is perfect, second owner.

The studs have been filed down nicely by the previous owner. Box, card and toolkit.

Video: https://imgur.com/a/LuBmyEJ

Selling my Tsprof K03. Not sure what the sub model was called. No axicube. Came with diamond plates. I’ve used this setup a grand total of 4 times. I have the og milled clips and 4mm hex screwdriver and all the accessories it came with. Has the heavy ass base plate. Feels like it’s made of granite. Still has the milled thumbscrews for mounting as well as the factory c clamp if you don’t plan on it being a permanent station. Which was my original plans but alas I don’t have enough space after the addition of my gaming desk and homelab. And I’ve got really good at freehand. Additional to what came with it is the whole milled fillet clamps. Not the easy ones. But I purchased a wera driver just for those screws because they’re smaller than the ones for the regular clamps. Shipping isn’t cheap for this but I’ve figured out a baseline I’m expecting for the weight and size. About 23 lbs. I’m finding the best rates for me are going to be ups by a wide margin. So free shipping is going to be through ups. I am shipping in the original crate it shipped in. Not the smallest way to ship.. but I want you to have everything it came with plus the stuff I added. I think I have a case to put the diamond plates in. I’ll wrap them and make sure they’re not going to move around. For the large box I have a box a pc case shipped in that will be modified to fit. I’ll try and eliminate the cooler master labeling in case you live in an apartment or something. And I’ll pack everything the best I can with that’s to keep all the pieces from moving. Probably using bubble mailers and scrap cardboard so nothing can jiggle. The diamond plates look a little dirty. I believe I didn’t clean them the last time I put them up. But I legit haven’t opened this crate in two years. If I had the space I’d love to have this thing set up constantly. But I don’t. So hopefully someone else can appreciate it at less than I originally paid for it before Russia tariffs. Shipping is from nc coast to continental United States. Will be ups ground saver. If you buy tonight I can have it dropped off at ups store tomorrow night before work.

Updated timestamp at end of photos. Originally posted to edcexchange but technically isn’t edc. So trying here

https://imgur.com/a/gyhWp7y

Please help a guy recover from a recent blade binge! 😁

Bundle #1:

Spyderco Endura Clipit in G2 Stainless SpyderEdge + Federal 12GA Shotgun Shell rosewood knife

Endura is is in very good shape for being over 30 years old with some very minor nicks around the butt and pivot end of the handle. Original volcano pattern scales. Blade appears to have been very lightly used, with some very light trails and a weird vertical streak on the show side ricasso. Everything looks light enough to polish out. Teeth and tip are in excellent shape, still quite pointy and sharp. Clip is broken as all the Clipits do. Assume cut carry sharpen etc.

Federal branded 12GA shotgun shell knife with a rosewood and brass handle. Made in Japan, lock back blade and slip joint file tool. Blade appears factory edge in excellent shape with light wear albeit not that sharp. Rosewood handles in good shape with some small nicks (or possibly just rough sanding job?). Overall a neat little conversation piece. Good gift for Dad/Grandpa. Assume cut carry sharpen etc.

Asking $75 shipped CONUS for the set.

Bundle #2:

H&K branded automatic BMHK14750BX made by Benchmade in USA. Limited edition, number 124 of 500 made. Partially serrated, 440C iirc, tip is very slightly rounded off and the very first serration after the plain edge is chipped. Appears to be factory edge, Benchmade should sharpen for free. Scales have seen far more use than the blade with numerous chips and scratches. Looks to be carried a lot and used little. Assume cut/carry/sharpen/wear. Auto action comes out hard and fast, lock works well. These are long since discontinued and proving hard to find.

Meyerco Blackie Collins Strut N Cut 2nd Generation. Weird little partially serrated front flipper assisted open made in Japan of AUS8 steel. Looks to be all original, blade and serrations in good shape despite dirt or surface patina. Action is good, lock works. Assume cut/carry/sharpen. Good shape for its age with a couple dings here and there. Neat little collector piece.

Asking $75 shipped CONUS for both.

Knife #3:

Classic Benchmade Mini Griptilian in 154CM hollow ground Sheepsfoot. This was my first Benchmade and what made me love them. This thing was grimy when I got it so I took the blade off to deep clean and oil the pivot. Sharpened it as close to the factory edge angle as I could at 320 grit with a 600 grit micro bevel. It's been my wife's package opener, so the first quarter inch has lost some of its bite but the rest is toothy sharp. Scales have a few little nicks and a weird discoloration on one side near the axis lock. Blade tip was rounded when I got it, most of it sharpened out, but I did come down from the spine just a hair to get the tip presentable. Tiny nick in the blade about 2mm from the tip, should sharpen out naturally, I just didn't want to overdo it on the first sharpen. This thing is by far the smoothest Benchmade I've had and incredibly satisfying to use. NO POCKET CLIP. I got it like this, I was gonna put a lanyard on it and carry it 5th pocket. BM will send you one for free. Cut carry sharpen etc.

Asking $70 shipped CONUS

Leatherman Bond, original run, clip pointblade. I bought it on eBay used, but if it has been used I can't tell. All of the tools look unused including the blade edge which looks to be sporting the factory burr. The handles are in excellent shape with some very very light trails that are hard to pick up on camera. Looks like it sat in a pocket or pouch and never got used. I would consider this a 9+/10 shape. Assume cut carry and sharpen but it does appear new for all intents and purposes.

*BOND IS SOLD*

Thanks for looking!

Open to reasonable cash offers, not looking for trades at the moment. Price includes shipping. PayPal G&S.

Big Chris Sportsman in M4 steel, blue and black G10, bought never used from original owner, so 2nd owner. Has been carried, used, sharpened, and loved. Great knife, just need to free up some cash. Has patina signs of use. $130 SOLD

Spyderco PM2 in Maxamet, with grey G10 scales. Original owner. Did a mustard and vinegar patina on it, very lightly used, don’t think I ever carried it. Not a folding knife guy but centering looks good, and locks up tight. $110 SOLD

Gransfors Bruk Wildlife hatchet, used lightly. Never sharpened. Note the cut in sheath from not paying attention. Applied a light coating of axe wax. $120 SOLD

Paypal F&F preferred, but can take other methods

Will ship via ups or USPS depending on buyers need.

ONLY trade I would be interested in would be a brightwash all Ti Talon, or regular brightwash talon and cash.

Folder with video and pictures: https://imgur.com/a/J9Phgvo

Carver Vagrant $1300

Second owner, first purchased from PNWCI. Has not been used or carried. Beautiful Norris Ball Storm Dama blade, Zirc backspacer and clip. Built in july 2026 AND #0069!!! Action is amazing, lockup is solid, blade does favor the show side just a bit. A Spidey flickers dream. Comes with the full kit, 3d printed box, cloth COA and leather slip.

Spyderco Para 3 Salt. I'm the original owner, used to cut maybe 2 boxes, has original box and as close to prestione as it gets. The steel is Magnacut. $200 🚢

Half Face Blade Karambito. I'm the original owner, has not been carried or used. It comes with the sheath, has just been a safe queen. Metal i beleave it's S45V. $300 🚢

Benchmade Presidio. I'm the original owner, no used or nothing to cut. Has original box. Steel its S30V. $160 🚢

Kershaw livewire OTF. I'm the original owner also has the box. Used just the action, no cut on it. Steel its Magnacut. $180 🚢

PayPal G&S

Hi swappers,

Bradford Guardian 3 is up for grabs today. First owner. Used, carried, sharpened and stropped. Green micarta handles and a nicely stonewashed blade in AEBL. Comes with factory sheath and Artemis sheath.

SV - 95 PPFF 90 PPFF SV 77 PPFF

Shipped USPS Ground Advantage (will ship tomorrow PM)

YOLO > whatever else

Hello knife friends and swappers! I am the second owner of both. Bought the black and gray tiger stripe SnG CC (concealed carry) from the original owner on the swap 4 months ago who originally bought it new from Knife joy. Bronze and grey SnG Lego was purchased last year but haven’t really carried both much at all. Moving these along because I bought another Lego SnG off the swap a few months ago and that’s the one I’m using and carrying lately. These have sat in a pelican case ever since so I hope someone will give them a new home or just to try out.

SV $600 for the CC and $475 for the Lego digital ACU camo. YOLO overrides chat but I ultimately reserve the right to final sale depending on circumstances. Will ship USPS priority fully insured within 24 hours of sale from the west coast. USA only all 50 states. Can ship UPS 3 day if you prefer UPS. Selling only, no trades at this time. PayPal FF no notes or Zelle. Thank you for looking friends. You can shoot me an offer via DM, worst I can say is no. Thank you for looking friends.

🟢 Strider SnG CC SV $600

Original owner purchased from knife joy new for $875

Blade: Spearpoint grind black and grey Tiger stripe MagnaCut

Handle: Full titanium flame striped contoured “concealed carry” (CC) handles.

Owners: 2

Carry: carried for a day or two at home.

Lock-up: Perfectly centered and no left-right movement. There is a tiny amount of up and down movement if you really try to force it with two hands, otherwise no movement just pushing with my thumb on the spine of the blade. If you tighten the pivot a tad more, the up and down goes away but it’s a slow roll open. Loosening up the pivot makes opening and closing smooth and able to thumb flick but up and down play is a little bit more noticeable. Zero lockstick.

Condition: There are a few snail in the flame anodization on the scales and on the pocket clip. A few marks on the tiger stripe blade and light gouges near the sharpening choil where it appears the previous owner sharpened and nicked the sharpening choil area. Does not affect function of the knife at all, just cosmetic. Please see close-up photo of the blade.

Disassembled: Yes, by previous owner but not by me. Easy to disassemble body screws with T10 torx and to adjust the pivot with a 3/16 allen key.

Cut: Yes by me to open a package and by previous owner. Original owner reprofiled and sharpened the edge to a polished edge at 22 dps at 1700 grit according to the original owner. Pretty sharp.

Includes: knife and a generic brown zippered pouch with padded interior. If you want a generic clear plastic bag that Striders usually come with from the factory, I can include that if you really want it along with the zippered pouch.

🔴 Strider SnG Lego SV $475 SOLD

I believe these retailed for $725 new

Blade: Spearpoint grind bronze and grey Tiger stripe MagnaCut

Handle: Digital ACU camo G-10 front scale and flame anodized Ti lock side.

Owners: 2

Carry: carried around for a few weeks before buying another Strider.

Lock-up: Perfectly centered and no left-right, up down movement. Zero lock stick.

Condition: There are a few snail in the flame anodization on the lockside scale and on the pocket clip. A few marks and light wear on the tiger stripe blade and a little bit of wear near the sharpening choil. Bronze tiger striping is a bit faded. Please see close-up photo of the blade. There is wear on the black oxide on the lock bar stabilizer.

Disassembled: Yes, previous owner did not disassemble but I disassembled “CRK style”by only taking the blade out. Body screws appear untouched. I used a direct-fit PSD tool to disassemble and reassemble the pivot to take the blade out to clean and relube with CRK grease. Please note the lock bar stabilizer screw needs a T7. I asked the original owner if the screw was factory and they said yes. Normally the LBS screw is a T8. I found this out when I went to swap out the LBS for a Pete Gray LBS but swapped back in the factory LBS with black oxide. I used a Wiha T7 bit to disassemble/reassemble the LBS screw.

Cut: Yes by me to open a package and cut by previous owner. Original owner sharpened the edge to a polished edge at about 25 dps to maintain the factory edge angle. I matched the factory edge to about 25dps on my Edge Pro to 2K grit and stropped on leather with green compound. Pretty sharp.

Includes: knife, clear plastic bag Striders usually come in.

Want to sell a 2021 Grant & Gavin Hawk Deadlock Model B with carbon fiber handles, stonewashed blade and tumbled titanium accents. The knife is in fantastic shape and is the only OTF with ZERO blade play and actuation as smooth as butter🧈.

I have included numerous pictures and a video for you to see the condition and functionality, so please take a close look at the images and video provided! If you would like more pictures or videos, please don't hesitate to ask, I'd be more than happy and willing to provide them to you!

Timestamp

Actuation is crisp, clean & reliable, just what you would expect from G&G Hawk knives.

Comes with the original G&G Hawk drawstring pouch, tool, lube, chapstick, sticker & business card.

Actuation Video

Pictures

SV: $2600

Preferred payment methods:

Zelle, Cash App, PayPal "friends & family" and Venmo "payment between friends".

⛔NO TRADES⛔

3 Knives and a couple and a few accessories up for grabs today. All prices shipped PayPal F&F no notes please.

Porcupine Cheesepirate $55
Steel: 14c28n
Carried/cut: yes
Sharpened: no
Centering/lockup: perfect
Looks like new comes with all original packaging. Love the knife, but I got tislim version I like more! Original owner

Kershaw Lucha w/Flytanium handles $99
Steel: 14c28n
Carried/cut/dropped: yes. See damage to tip
Sharpened: no
Centering/action: Great, flips really well… dropped it once. I have a couple of other Luchas and play with those more. Comes with box that’s got some damage on it, no factory handles… original owner

North Mountain Blade Chop2 Carbon fiber $95
Steel: sld-magic
Carried/cut: yes
Sharpened: no
Centering/lockup: perfect
Original owner, original box and packaging, perfect condition.

Flytanium titanium Bugout thumbstud $11
Original owner never installed, new in package.

Generic Spyderco PM2 deep carry clip $9
Has been installed carried, new screws, shows wear. Polished look. Freebie add on with any other purchase.

SOLD Benchmade Bugout cleaning mat and Benchmade cloth $20 for both. Original owner, have been probably used. SOLD

PayPal friends and family (no notes).  US shipping only.  YOLO has priority.  Please follow up with chat. Not looking for any trades.

time stamp https://imgur.com/a/9bzSOml

Manticore MODDED
Magnacut, ti, timascus and zirc.  
I am the original owner.  It has been carried briefly and used a little.  Sharpened once.  Lockup around 25%.  No blade play.  Good centering.  Detent is great for back flipper and studs.
The front/ top flipper never worked well for me so I tried to reshape the mohawk.  Disassembled for mod.  Well it still doesn’t work well for me but maybe it would work better for someone with larger hands.  Or you could grind it off completely.  I managed to mark the tang while grinding it - see video.
Comes with box, pouch, extra parts, and cloth.
$130

video https://imgur.com/a/nd454g0

Hey All [Timestamp Pictures](https://imgur.com/a/1rdXUJL) - PayPal G/S

Parting ways this pristine TRC Urban Tactical Signature Series - DLC finish (Elmax) - $500 shipped.

1st Owner, bought on DLT Trading. Never carried, never cut, yet I have pulled it out to admire it. Brand new, yet no box, safe queen. Includes authenticity booklet.

PayPal G/S

Please comment on this post prior to chatting me with any questions. Thank you!

Timestamp. Prices are PPFF.

Null Voodoo

Condition - Used. Great condition.
Steel - M390
Sharpening - No
Cut or Carried - Both cut and carried, although use has been minimal.
Disassembled - Yes, to change scales.
Edge Condition - Excellent.
Action and Centering - Perfect action and centering. Flies out and locks up rock solid.
Owners - 2 or 3.
Box - Box, authenticity card, extra fat carbon scales.

Price - $375 SOLD
___________________________________________________________

Hinderer NF Skinny Harpoon

Condition - Excellent
Steel - Magnacut
Sharpening - None
Cut or Carried - Both, but minimal. Mostly fidgeted, tested on paper.
Disassembled - No
Edge Condition - Essentially factory
Action and Centering - Both are perfect
Owners - 2
Box - Yes, with tri-way hardware and assembly card

Price- $395 SOLD

___________________________________________________________

Transparent Knives reblade Bugout

Condition - New blade, used bugout.
Steel - Magnacut reblade, s30v combo original
Sharpening - No
Cut or Carried - Yes, paper.
Disassembled - Yes
Edge Condition - Factory
Action and Centering - Off center, but no rubbing. Good action, but will need some tuning.
Owners - I am 1st owner of the TK blade, second for the bugout.
Box - No

Price- $350

___________________________________________________________

Spyderco REC Native 5 g10/204p

Condition - User
Steel - 204p
Sharpening - None
Cut or Carried - Yes to both by prior owners.
Disassembled - None that I know of. Certainly not by me.
Edge Condition - Great. Feels sharp.
Action and Centering - Centered. Typical action for spyderco lock back.
Owners - 3
Box - Mismatched spyderco box

Price - $160

___________________________________________________________

Spyderco Stretch 2 XL Cruwear/g10

Condition - User. Well loved. Truly think this is one of Spyderco’s best offerings (if you are down with big knives). Light scratches and stains on the blade, but NO pitting or rust.
Steel - Cruwear
Sharpening - Yes
Cut or Carried - Both, extensively.
Disassembled - Yes.
Edge Condition - Light stains that will come out with the next sharpening.
Action and Centering - Superb, smooth action, especially for a lock back. Centered.
Owners - 1
Box - Original box

Price - $170

___________________________________________________________

Cold Steel SR1

Condition - used.
Steel - S35vn
Sharpening - None
Cut or Carried - Cut and carried
Disassembled - No
Edge Condition - Factory edge, EXCEPT for tip damage (will sharpen out)
Action and Centering - Centered, excellent action. Never adjusted.
Owners - 1
Box - No

Price- $85

___________________________________________________________

Leatherman Arc

Condition - User. Carried and used nearly every day. Just cleaned as best I could without disassembly. No rust or pitting.
Steel - Magnacut
Sharpening - Yes
Cut or Carried - Extensively
Disassembled - Never
Edge Condition - Good working edge without rolls or chips
Action and Centering - Excellent
Owners - 1
Box - No box. Includes stock sheath and some extra LM bits I have laying around (NOT complete sets)

Price - $160

___________________________________________________________

Rockscale Design AD20/S thick Ti scales

Condition - Used, minimal snail trails because I’ve had for less than a week.
Carried - Yes
Disassembled - Mounted on AD20S
Owners - 1
Box - Yes

Price - $180, or trade for FDE g10 scales + cash

___________________________________________________________

Olight Arkfeld Pro

Condition - Used. Some wear on the body. Thought I lost it so I replaced it with the Wurkkos (which is not for sale, decided against it). Everything functions as it should. All modes work. Great EDC light.
Owners - 1
Box - No. Also missing the charger. Priced accordingly.

Price - $50

___________________________________________________________

Trade interests

- Demko AD20 Whale Shark
- CRK Small PJ sebenza insingo, sandblast (ideally silver hardware)
- CRK Large PJ Sebenza, drop pointm, sandblast (ideally silver hardware)
- Spyderco Caribbean sheepsfoot
- AD20S flat dark earth g10 scales

Shipping

Will ship USPS, insured, either Thursday morning or Monday.

Reate T3500

3rd owner

Limited run 35 of 115

Steel M390

Signs of carry. Scuffs/snails on clip, Lockhart and top of lockbar. No signs of cut. Looks to be factory edge. Blade is centered and lockup is excellent. No disassembly. No original box/packaging. Asking 2️⃣2️⃣5️⃣🛳. TRADED